Water Filtration in Burlington

Installed-in-Burlington pricing ranges from $600–$2,200 for under-sink reverse osmosis (the GTA bestseller), $1,300–$4,000 for whole-house catalytic carbon, $1,500–$5,000 for a water softener, $900–$2,400 for a UV sterilizer (well water), and $4,500–$10,000 for a complete combo system (softener + carbon + RO). Hardware markup is 25–50% from wholesale; install labour at $150–$250/hour for 3–6 hours. Free water test before any quote. Call 289-212-2345.

Yes — Burlington tap water meets all Ontario Reg 169/03 Drinking Water Quality Standards per the City's annual report. Caveats: chloramine residual since 2004 (standard pitcher carbon does not remove the disinfectant smell well — catalytic carbon required); lead service lines in pre-1955 homes can still leach lead at the home regardless of plant compliance; PFAS at low single-digit ng/L has been detected in Lake Ontario raw water under the new Health Canada 2024 Objective (≤30 ng/L summed for 25 PFAS). For belt-and-suspenders quality, whole-house carbon plus RO at the kitchen sink is the practical answer.

Recommended but optional for municipal supply. Burlington Lake Ontario hardness runs 117–140 mg/L (~7–8 grains per gallon) — moderately hard, enough to scale tankless water heaters (manufacturer warranties often require softening above 7 gpg), shorten kettle lifespan, leave shower-glass spots, and cause dishwasher film. Essential for rural-GTA wells running 200–500 mg/L. We size to your actual hardness lab number, not a guess.

They solve different problems. RO removes dissolved contaminants (lead, fluoride, PFAS, chloramine, nitrate, dissolved solids) at the kitchen tap — drinking and cooking water. Softener removes hardness minerals (calcium, magnesium) from all hot and cold water in the house — scale prevention. Most premium GTA homes install both: softener as whole-house, RO at the kitchen sink. For drinking-water-only concerns and rented condos, just RO. For dishwasher / shower-glass / water-heater issues, just softener.

Five matter most. NSF 42 — aesthetic only (chlorine taste, odor, particulate), does NOT certify health contaminants. NSF 53 — health (lead, cysts, VOCs, chromium) — the standard to demand for any lead-removal claim. NSF 58 — reverse osmosis whole-system performance under cyclical pressure. NSF 401 — emerging contaminants (pharmaceuticals, BPA, some PFAS, herbicides). NSF 372 — lead-free contact materials (≤0.25% Pb). Avoid filters that say 'NSF tested' without naming a specific standard — that's marketing weasel wording.

Yes — RenoHouse coordinates water filtration installation across Burlington, Mississauga, Brampton, Vaughan, Markham, Richmond Hill, Oakville, Burlington, Etobicoke, Scarborough, North York, plus rural GTA Caledon, King, Stouffville, Uxbridge, Mono, Halton Hills (well-water treatment). Travel surcharge may apply outside the M and L1-L7 postal-code core. Free in-home water test before any quote.

Sometimes — depends on condo declaration and drain configuration. Many condo boards prohibit salt-based softeners due to sodium loading on shared drains and aging cast-iron stacks. The workaround is a salt-free template-assisted-crystallization (TAC) conditioner — Pelican, Pentair, Aquasana — which prevents scale formation without sodium addition or backwash drain demand. TAC inhibits scale rather than removing hardness ions, but for moderately-hard Burlington water (7–8 gpg) it works well enough for most condo applications. Always check condo declaration first.

Generally no for under-sink units (point-of-use cartridge swap or RO under the kitchen sink). Yes for whole-house systems that modify the main water supply line — Ontario Building Code Part 7 (Plumbing) Section 7.6 governs potable-water system protection, and OBC-compliant air gaps on RO drain discharge are required (CAN/CSA-B64.10 backflow prevention selection standard). Whole-house softeners often require permit pull. Lead service line replacement always requires a City of Burlington plumbing permit. RenoHouse handles all permit paperwork through licensed plumber partners.

Spa-style bathrooms require adequate water supply for rainfall showerheads (often ¾" supply lines), proper drain capacity for freestanding tubs, and potentially a larger water heater or on-demand system. We design plumbing layouts that support luxury features like body jets, steam showers, and heated floors.

For premium homes, whole-house water filtration protects high-end fixtures from mineral buildup, extends appliance life, and provides clean water at every tap. Systems range from $2,000–$5,000 installed and are especially valuable in areas with harder water — protecting your investment in luxury plumbing fixtures.

Hydronic radiant floor heating uses a boiler and PEX tubing under your floors to provide even, comfortable heat without forced air. It's the gold standard for luxury homes and works beautifully under tile, stone, and engineered hardwood. We design and install complete systems including the boiler connection.