Basement Underpinning in Georgetown

Full underpinning structural scope only: $80,000–$150,000 for typical Georgetown detached. Bench footings: $30,000–$50,000. Add waterproofing during underpinning: +$8,000–$25,000. Add basement-finish wrap (framing, electrical, plumbing rough-in, drywall, flooring, paint): +$60,000–$150,000. Total underpinned + finished basement: $200,000–$400,000. Premium multiplex legalization with full basement unit: $300,000–$500,000.

Bench footing: cheaper ($30K–$50K), faster (4–8 weeks), structurally simpler — but reduces interior floor area by ~1.5–2 ft on each wall. Best for budget-sensitive projects, narrow-lot semis with excavation-access constraints, or where lost floor area is acceptable. Full underpinning: more expensive ($80K–$150K), longer (10–20 weeks structural + 4–8 weeks finish), more complex — but adds 1–3 ft of head height across the entire basement without reducing dimensions. Best for full multiplex conversions, premium basement renos, and homes where every square foot matters. We assess at the site visit.

Most Georgetown homes built before 1950 have basement ceilings of 6'2"–6'8" — uninhabitable per Ontario Building Code OBC 9.10 which requires 1.95 m (6'5") minimum head height for habitable rooms in dwelling units. Underpinning to 7'6"+ unlocks legal basement apartments under Bill 23 / Georgetown multiplex bylaw 474-2023, basement saunas (need 7'6"+ for bench headroom), wine cellars (typically 7'+), home gyms (8'+ for overhead exercises), and basement bedrooms with proper egress.

No. Underpinning requires a Professional Engineer (PEng) of record — a licensed Ontario structural engineer who designs the underpinning sequence, specifies steel reinforcement and concrete strength, signs sealed drawings, and inspects critical milestones. RenoHouse does NOT have a PEng on staff — we work with named partner structural firms (typical fee $4,000–$12,000 for full underpinning design). RenoHouse coordinates the engineering, holds the construction contract, and handles renovation finish work; the PEng signs the structural drawings.

No. RenoHouse does not own underpinning excavation equipment. We coordinate licensed underpinning specialists (Dryshield, Strong Basements, Aquamaster, Nusite Group, or equivalent) for the structural underpinning work — they have the specialty equipment, $5M+ liability coverage, and trained crews. RenoHouse handles the renovation finish wrap in-house: waterproofing membrane, framing, electrical, plumbing, drywall, paint, flooring, and any kitchen/bath in the new basement unit. The customer has one contract with us.

Bench footings: 4–8 weeks structural, 4–6 weeks finish (8–14 weeks total). Full underpinning: 10–20 weeks structural, 4–8 weeks finish (14–28 weeks total). Permit and engineering up front: 4–8 weeks before excavation begins. Legal multiplex basement unit (underpinning + finish + kitchen + bath + electrical sub-meter): 6–12 months total project clock.

Risk is real but manageable with proper engineering. The PEng designs the underpinning sequence (typically 'pin alternating' — small section excavated, footing poured, cured, before adjacent section excavated) so structural load is never compromised. Settlement is monitored throughout. The homes most at risk are those with shallow existing footings on weak soil — the soil report and PEng assessment identify these cases at the design stage. RenoHouse has zero structural damage incidents in 13 years on coordinated underpinning projects.

Mostly yes for full underpinning. The basement is unusable during structural work, and noise/vibration during excavation is significant. Most homeowners vacate for 4–8 weeks during the structural phase, then re-occupy during finish. Bench footings sometimes allow occupancy throughout. Multiplex conversion projects typically require vacant possession of the entire home during structural work; LTB procedures (N12/N13) are the homeowner's responsibility.

Georgetown's killer value-creation play: underpinning unlocks legal basement-unit head height, which enables a 4-unit multiplex conversion under Bylaw 474-2023; adding a garden suite or laneway suite (1 unit) creates a 5-unit stack that qualifies for CMHC MLI Select financing — up to 95% LTV, 50-year amortization, energy-efficiency forgivable grants up to $85K/unit. RenoHouse delivers the underpinning + multiplex construction. Financing structuring is between the homeowner and a qualified mortgage broker — we do NOT arrange CMHC MLI Select financing.

Heritage Conservation District (HCD) homes (Cabbagetown, Riverdale, the Annex, Wychwood, parts of Leslieville) require Heritage Permit when underpinning affects exterior elements (window wells, walkout, exterior staircase). We design interior-only scope where possible to avoid Heritage Permit triggers; when exterior work is required, Heritage Permit adds 4–8 weeks. Underpinning itself is typically not visible from the street so the permit is usually approvable.