Drop Ceiling Installation in Etobicoke

Yes — T-bar, drop ceiling, suspended ceiling, and Armstrong ceiling are different names for the same system. The framework is metal T-shaped rails (the T-bar grid) suspended on wires from the structural ceiling above, forming a grid of 2x2 ft or 2x4 ft openings. Ceiling tiles (panels) drop into the openings. Armstrong is the dominant brand in North America, which is why people often call any drop ceiling 'an Armstrong ceiling'.

Turnkey installed pricing in the GTA: residential basement standard $4-6/sqft ($3,200-4,800 for an 800 sqft basement); commercial office standard $5-8/sqft; premium acoustic tiles add $3-5/sqft; designer or metal-look tiles add $4-8/sqft. Tile-only replacement runs $5-10 per tile standard, $10-18 per tile acoustic. We quote firm over the phone if you give us square footage and tile preference.

Yes. If your existing T-bar grid is sound, we do tile-only replacement — pop out the damaged panel, drop in the new one. Common reasons: water staining from a leak above, sagging from humidity, yellowing from old fluorescent lights, mechanical damage. We match the tile pattern to existing as closely as possible and can colour-match newer to older if you have a multi-decade-old install where Armstrong has discontinued the original SKU.

Drop ceilings need a minimum of 3 inches of drop below the joists for standard 15/16-inch grids — 4-6 inches is typical for clearance over ductwork and recessed lights. Ontario Building Code requires 6 ft 5 in (1.95 m) finished ceiling height in basements for liveable space; if your existing joists are at 7 ft 6 in or higher you have plenty of room. We measure the lowest obstruction (usually HVAC ducts) on the free quote — if clearance is tight, we recommend low-profile 9/16-inch fineline grid (saves an inch) or drywall instead.

Yes, but read the tile rating carefully. NRC (Noise Reduction Coefficient) measures sound absorbed within the room — important for conference rooms, boardrooms, medical exam rooms. CAC (Ceiling Attenuation Class) measures sound blocked from going up through the ceiling and back down through an adjacent room — important for privacy between offices. A standard fissured mineral fiber tile is NRC 0.55 / CAC 33. Acoustic-rated tiles like Armstrong Ultima or USG Mars hit NRC 0.70 / CAC 40+. Real-world reduction in basement-to-main-floor sound transmission with acoustic tiles versus standard is 6-12 dB — noticeable when a basement movie room is below a bedroom.

15/16-inch (heavy-duty Prelude / Donn) is the standard commercial grid — wide visible T face, strongest, works with any tile. 9/16-inch (fineline Suprafine) is narrower-visible — looks more like a finished ceiling and is preferred in upscale residential and design-conscious commercial spaces. Both meet code. We use 15/16-inch for basements and back-of-house commercial; 9/16-inch fineline for medical clinics, dental offices, lawyer offices, and high-end home theatres.

Yes — that's actually a common reason to choose a drop ceiling over a removal. Pre-1990 popcorn ceilings may contain asbestos and full removal requires Type 2 asbestos abatement ($6,000-12,000+ for a basement). Suspending a drop ceiling below it leaves the original undisturbed, encloses it, and costs a fraction. We coordinate asbestos testing first if pre-1990 — if positive, the drop ceiling is often the smartest budget choice and we install with care to avoid disturbing the texture above.

An 800 sqft basement typically takes one full day with a 2-person crew — about 8 hours including demo of old materials, layout snap-lines, perimeter wall angle, grid hanging on wires, and tile drop-in. Commercial offices of 2,000-3,000 sqft are 2-3 days with the same crew. Tile-only replacement on a sound existing grid is roughly 25-40 tiles per hour for a single tech, so a 1,000 sqft tile swap is 5-8 hours of labour.

Popcorn ceilings applied before 1990 may contain asbestos fibers. We recommend professional testing before any removal work. If asbestos is found, we follow Ontario Ministry of Labour guidelines for safe removal, containment, and disposal — protecting your family's health throughout the process.

A typical room takes 1–2 days including scraping, skim-coating, sanding, and priming. A full home (4–6 rooms) usually takes 3–5 days. The result is a smooth, modern ceiling that instantly updates the look of your home.

Minor cracking can be repaired with mesh tape and joint compound, followed by skim-coating. Severely damaged plaster ceilings are better replaced with new drywall — this also lets us add modern insulation and address any hidden moisture or structural issues above the ceiling.