Video Doorbell Installation in Caledon

Not for a swap on an existing doorbell circuit — ESA does not require permit for like-for-like low-voltage doorbell work. If the transformer is being added new to a panel breaker, an electrician is required per OESC 2024 Section 16.

Yes. We use a Ring brick mount or a Eufy wedge plate with Tapcons into the mortar joint (never into face brick). Drilling is masonry SDS only.

Mechanical chimes need a Pro Power Kit (Ring) or Nest connector wire to handle the live-view current draw. Digital chimes usually need to be bypassed entirely.

Most cameras spec down to -20°C; below that the lithium batteries (in battery models) brick out. Hardwired models keep running because the transformer warms the unit.

Yes, including cap-and-tape on retired bell wire and patch of the old chime alcove if it was set into drywall.

Yes — we run underground electrical feeds from your main panel to workshops, barns, and detached garages. This requires properly rated underground cable, GFCI protection, and a sub-panel at the outbuilding. We handle the trench routing, conduit installation, and ESA inspection for a safe, code-compliant connection.

Standby generators (natural gas or propane) provide automatic backup during outages — critical for rural homes where power restoration takes longer. Solar with battery storage is growing in popularity for rural properties. We install both options, including the transfer switch that safely disconnects from the grid during generator operation.

Workshop electrical typically includes a 100A sub-panel, 240V outlets for heavy equipment, 120V circuits for tools and lighting, and proper grounding. We design the layout based on your specific equipment needs, ensuring adequate capacity for all your tools without tripping breakers. ESA inspection ensures everything meets code.