Light Fixture Installation in Scugog

Pot light installation in the Scugog typically costs $100 to $200 per light including the fixture, depending on ceiling type and access. Volume discounts are available for 6+ lights. RenoHouse provides free estimates for all lighting projects.

Yes, our electricians can run new wiring and install a junction box to add a chandelier or any light fixture in a new location. This requires fishing wire through walls and ceilings, which our team handles expertly.

Simple fixture replacements typically don't require a permit. However, new circuit installation, adding new fixtures where none existed, or pot light installations may require an ESA permit. RenoHouse handles all permit requirements.

A general rule is one 4-inch pot light per 4-6 square feet, or one 6-inch pot light per 6-8 square feet. For a typical 12x12 room, 4-6 pot lights provide excellent coverage. RenoHouse designs a layout during your free consultation.

Yes, we install dimmer switches compatible with your new fixtures. For LED pot lights, we use LED-compatible dimmers to prevent flickering. Dimmers are a great way to control ambiance and save energy.

A simple fixture swap takes 30-60 minutes. Installing 6-8 pot lights typically takes 4-6 hours. Larger projects with new wiring may take a full day. RenoHouse provides a time estimate during your consultation.

Yes, RenoHouse installs outdoor lighting including security lights, motion sensors, landscape lighting, deck lights, and porch fixtures. All outdoor installations use weather-rated fixtures and GFCI protection as required by code.

Yes — we run underground electrical feeds from your main panel to workshops, barns, and detached garages. This requires properly rated underground cable, GFCI protection, and a sub-panel at the outbuilding. We handle the trench routing, conduit installation, and ESA inspection for a safe, code-compliant connection.

Standby generators (natural gas or propane) provide automatic backup during outages — critical for rural homes where power restoration takes longer. Solar with battery storage is growing in popularity for rural properties. We install both options, including the transfer switch that safely disconnects from the grid during generator operation.

Workshop electrical typically includes a 100A sub-panel, 240V outlets for heavy equipment, 120V circuits for tools and lighting, and proper grounding. We design the layout based on your specific equipment needs, ensuring adequate capacity for all your tools without tripping breakers. ESA inspection ensures everything meets code.