Electrical Wiring & Rewiring in Caledon

Complete home rewiring in the Caledon typically costs $8,000 to $20,000+ depending on the home's size, number of circuits, and accessibility of walls and ceilings. RenoHouse provides detailed free estimates for all rewiring projects.

Yes, knob-and-tube wiring is considered a fire hazard. The insulation deteriorates over time, connections become loose, and it lacks grounding. Many Caledon-area insurance companies won't insure homes with knob-and-tube wiring or charge higher premiums.

A complete home rewiring typically takes 3-7 days depending on the home's size and complexity. RenoHouse works efficiently to minimize disruption, and power is restored as quickly as possible during the process.

While not legally required, many buyers and home inspectors flag outdated wiring. Homes with knob-and-tube or aluminum wiring may be difficult to insure, which affects the sale. Rewiring before selling can significantly increase your home's value and marketability.

Aluminum wiring itself isn't inherently dangerous, but aluminum connections expand and contract more than copper, creating loose connections that overheat. RenoHouse can either rewire with copper or install approved aluminum-to-copper connectors (pigtailing) as a code-compliant solution.

Our electricians use fish tape and flexible drill bits to route wiring through existing walls with minimal damage. Some access holes may be needed, which we patch and prepare for painting. For complete rewires, some drywall work is typically required.

Yes, all electrical wiring work in Ontario requires an ESA permit and inspection. RenoHouse handles the complete permit process, including pulling the permit, performing code-compliant work, and scheduling the ESA inspection.

Yes, we wire finished basements including lighting circuits, outlet circuits, dedicated circuits for appliances, and connections for bathroom fans and kitchenettes. RenoHouse handles the complete electrical scope for basement renovations across the GTA.

Yes — we run underground electrical feeds from your main panel to workshops, barns, and detached garages. This requires properly rated underground cable, GFCI protection, and a sub-panel at the outbuilding. We handle the trench routing, conduit installation, and ESA inspection for a safe, code-compliant connection.

Standby generators (natural gas or propane) provide automatic backup during outages — critical for rural homes where power restoration takes longer. Solar with battery storage is growing in popularity for rural properties. We install both options, including the transfer switch that safely disconnects from the grid during generator operation.

Workshop electrical typically includes a 100A sub-panel, 240V outlets for heavy equipment, 120V circuits for tools and lighting, and proper grounding. We design the layout based on your specific equipment needs, ensuring adequate capacity for all your tools without tripping breakers. ESA inspection ensures everything meets code.