Dental Office Buildout in Pickering

Usually not full room shielding. Intraoral units at the operatory chair are mitigated by operator distance + Pb apron + a 1.2m mobile shield or fixed partition. A qualified expert assessment is still required by HARP, but it's typically a paper exercise, not construction. Panoramic and CBCT always require full shielded rooms (0.5-1.5mm Pb depending on equipment kV and workload).

Dedicated mechanical room with active ventilation (typically 100-150 cfm exhaust + replacement air), acoustic isolation on shared walls (STC 50+), vibration-isolation pad under each piece, and accessible service clearance. Putting them in a closet without exhaust shortens equipment life by 40-50% and almost always creates a noise complaint with the neighbouring tenant.

Both follow similar floor/wall rough-in templates but with slightly different umbilical positions and waste line elevations. Belmont and Mocom in the value tier; Sirona Treatment Centers in the premium European tier. Always get the chair vendor's stamped rough-in drawing BEFORE plumbing pours — a 12mm miss on the floor box requires breaking tile to correct.

Yes. Federal Code of Practice (2017) and Ontario's adoption requires every dental office to operate an ISO 11143 amalgam separator regardless of current procedure mix, because legacy restorations are still being removed. Solmetex Hg5 NXT and DRNA Eco II are the dominant compliant units; both need annual cartridge service contracts.

Pickering Building shell + interior TI 8-12 weeks, plus MOH imaging unit installation approval 6-10 weeks running mostly in parallel. Total 12-16 weeks. 905 municipalities often slower for CBCT specifically — Markham regularly runs 14-18 weeks.